Тема: Актуальные прошивки для WGR614v9
http://files.netgear.ru/firmware/wgr614 … 0.44RU.chk
Исправлена проблема при использовании PPTP + статический IP с режимом подключения по требованию.
Добавлено: 26 августа.
http://files.netgear.ru/firmware/wgr614 … 0.35RU.chk
1.Support the Port Forwarding/Port Triggering/UPnP Port Mapping/DMZ/Block Service/Block Site functions on the intranet interface.
2.Add new Time Zone: GMT+5:30 & GMT+13.
3.Add MAC clone/spoofing for PPPoE.
NOTE: this firmware cannot work with the old CD’s (earlier than CD 2.0) that do not have the Smart Wizard 3.0 application.
(*) indicates the bugs that should be advertised to users, please note that bugzilla numbers should be removed before posting.
1.(*)Sometimes accessing a web site would get an incomplete page or a corrupt page, and sometimes a file downloaded is corrupt.
2.(*)When Daylight Saving is enabled, the filtering schedule works an hour later than expected.
3.(*)Some browsers (e.g. IE8) cannot work with the router GUI to do firmware upgrade.
4.The translation error in the Wizard (Configuration Assistant) GUI.
5.Cannot add a Port Triggering rule of port 80
6.DDNS Cancel button doesn’t work..
7.For the DMZ Server setting and LAN Address Reservation, users can only configure the 4th octet of the IP address, even if the router’s LAN is not a class C subnet.
8.Cannot talk to some PPPoE server to get the router’s public IP address.
(*) indicates the bugs that should be advertised to users.
1.(*)FVS114 VPN sometimes cannot pass through the router. To work around the problem, please make sure there is only one VPN client active on the LAN. If that still does not work, reboot the router and create the VPN connection right after the router boots up and before running any other application.
2. [WDS] The WDS function cannot work with the Atheros (e.g. WPN824v3) solution when WGR614v8 acts in the Base Station mode.
3. [WDS] The WDS function cannot work when the security mode is WPA, we will disallow this combination in the next release.
4. MSN Remote Assistance doesn't work when a LAN party invites an Internet party if the Internet party is connected to the Internet directly and has 2 IP address on its Ethernet port. For example, if a PC-1 is connected to the Internet directly through PPPoE and the Ethernet interface running the PPPoE has another IP address like an auto-IP address, 169.254.x.x, another PC-2 on WGR614v8’s LAN cannot invite the PC-1 for remote assistance.
To work around this issue, users can do “ipconfig /release” on PC-1 and send the invitation from the PC-2 again.